PC-Tech
Guest
|  Posted: Sat Oct 14, 2006 10:16 am Post subject: AX6BC |
| Hello i ran across this old PII board for $10.00. So i get it home i
put it in case connect the little wires. I plugged in the keyboard
and mouse. Then plugged in the powercord. When i plugged in the cord
the system came on right then. Would not shut down by the power
button. Well i could have had it in wrong place it wasn't marked. The
reset was marked and one sw right by the reset. I plugged it in the
sw. So i know the board works because its got power. Nothing shows on
screen. I tried different cards and i tried another battery no luck. I
was hopeing to get it to run on a celeron 1.1 Ghz. I haven't put the
1.1 in yet ive tried a PII 350 Mhz and a Celeron 533 Mhz still
nothing on screen. |
|
