| View previous topic :: View next topic | | Author | Message |
|---|
Guest
|  Posted: Mon Oct 30, 2006 3:52 pm Post subject: Redirecting output to a file causes OOPS |
| When I redirect my output to a file on my NFS server, rather than to
the screen, I get the OOPS below. I am running Linux 2.4.26. Any
suggestions?
Eclipse # cat /proc/dramFPGA/RxCOM > rxcom
Oops: kernel access of bad area, sig: 11
Machine check in kernel mode.
Caused by SRR0=0xC0005CB4
Caused by (from SRR1=81032): Machine check signal
Oops: machine check, sig: 7
NIP: C0015494 XER: 00000000 LR: C000887C SP: C18633D0 REGS: c1863320
TRAP: 0200 Tainted: P
MSR: 00081032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1862000[214] 'cat' Last syscall: 3
last math c1862000 last altivec 00000000
GPR00: 00000000 C18633D0 C1862000 C18634D8 F001090C 000007D0 C18639AC
FFFFFFFF
GPR08: 00000000 C00061DC 00000000 C1863CD0 C0019C8C 1007BABC 00000000
00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01863DD0 00000000
00000000
GPR24: 00030001 20000000 C1863DE0 C019E1A0 C1863DE0 C0169970 0000000B
C18633D0
Call backtrace:
00000002 C00061DC C0013774 C0013558 C0005B88 C4B6C790 C00695BC
C00426B0 C000593C 1004A628 10048A4C 1000B220 100038B0 10003530
0FEC6D74 00000000
Bus error
Eclipse # |
| | Back to top | |  | glen herrmannsfeldt
Guest
| | Posted: Wed Nov 01, 2006 2:26 pm Post subject: Re: Redirecting output to a file causes OOPS |
| jobhunts02@aol.com wrote:
| Quote: | When I redirect my output to a file on my NFS server, rather than to
the screen, I get the OOPS below. I am running Linux 2.4.26. Any
suggestions?
Eclipse # cat /proc/dramFPGA/RxCOM > rxcom
Oops: kernel access of bad area, sig: 11
Machine check in kernel mode.
|
Machine check is supposed to happen when the processor discovers
an internal error, such that the hardware isn't doing what it is
supposed to do.
It might be that on some processors it is possible to cause
a machine check running code designed for a different processor
model.
-- glen |
| | Back to top | | | |
|
