| View previous topic :: View next topic | | Author | Message |
|---|
Guest
|  Posted: Thu Aug 31, 2006 2:38 pm Post subject: Epox Beep Codes |
| hi,
ive installed an Epox 4BDA with a 400mhz p4 and 2x256mb ddr ram. i
have an agp graphics card in it.
when i turn the machine on the fans power up etc, but i get a
completely blank screen and a stange beep code.
it starts off with a very long beep, but before the second long beep
finishes, a higher pitched and faster set of beeps begin to soun out
over the top of the continuous long beeps.
is this a number of problems to cause a more complex beep code?
thanks for your help,
duncan |
| | Back to top | |  | dave
Guest
| | Posted: Fri Sep 01, 2006 2:48 pm Post subject: Re: Epox Beep Codes |
| http://www.bioscentral.com/beepcodes/awardbeep.htm
DaveL
<dunctait@hotmail.com> wrote in message
news:1157053136.502716.206150@i3g2000cwc.googlegroups.com...
| Quote: | hi,
ive installed an Epox 4BDA with a 400mhz p4 and 2x256mb ddr ram. i
have an agp graphics card in it.
when i turn the machine on the fans power up etc, but i get a
completely blank screen and a stange beep code.
it starts off with a very long beep, but before the second long beep
finishes, a higher pitched and faster set of beeps begin to soun out
over the top of the continuous long beeps.
is this a number of problems to cause a more complex beep code?
thanks for your help,
duncan
|
|
| | Back to top | | | |
|
